Search
Now showing items 1-10 of 23
The prediction of low quality boiling voids
(Cambridge, Mass. : M.I.T. Division of Sponsored Research, [1963], 1963)
Slug flow theory is used to predict the density in heated channels of various shapes. In order to make this calculation possible, measurements are made of the bubble rise velocity in annuli, tube bundles, and channels. It ...
Model of critical heat flux in subcooled flow boiling
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1968], 1968)
The physical phenomenon occurring before and at the critical heat flux (CHF) for subcooled flow boiling has been investigated. The first phase of this study established the basic nature of the flow structure at CHF. A ...
Burnout in forced convection nucleate boiling of water
(Cambridge, Mass. : M.I.T. Heat Transfer Laboratory, [1957], 1957)
Data are presented for burnout in forced coivection nucleate boiling of water at pressures above 500 psia. A dimensionless correlation is devised for. the M.I.T. data which is found to be valid for certain recent data ...
Void volumes in subcooled boiling systems
(Cambridge, Mass. : M.I.T. Division of Industrial Cooperation, [1958], 1958)
Introduction: Knowledge of the pressure drop in a channel and the resulting flow redistribution is essential in predicting the performance of a nuclear reactor. The pressure drop in a channel which is experiencing boiling ...
Forced-convection, dispersed-flow film boiling
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1969], 1969)
This report presents the latest results of an investigation of the characteristics of dispersed flow film boiling. Heat transfer data are presented for vertical upflow of nitrogen in an electrically heated tube, 0.4 in. ...
A study of boiling water flow regimes at low pressures
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1966], 1966)
"A comprehensive experimental program to examine flow regimes at pressures below 100 psia for boiling of water in tubes was carried out. An electrical probe, which measures the resistance of the fluid between the centerline ...
Correlation of maximum heat flux data for boiling of saturated liquids
(Cambridge, Mass. : Massachusetts Institute of Technology, Division of Industrial Cooperation, [1955], 1955)
Liquid and gas distributions in a two-phase boiling analogy
(Cambridge, Mass. : Massachusetts Institute of Technology, Division of Industrial Cooperation, [1958], 1958)
This report contains a description of the design and operation of an experimental appats for the analysis of two-phase flows similar to thom occuwring in boiler tubes at low pressures. Velocity and denuity profiles of ...
Forced-convection surface-boiling heat transfer and burnout in tubes of small diameters
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1962], 1962)
A basic heat-transfer apparatus was designed and constructed for the study of forced-convection boiling in small channels. The various regions of forced-convection surface boiling were studied experimentally and analytically. ...
Film boiling of saturated liquid flowing upward through a heated tube : high vapor quality range
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1964], 1964)
Film boiling of saturated liquid flowing upward through a uniformly heated tube has been studied for the case in which pure saturated liquid enters the tube and nearly saturated vapor is discharged. Since a previous study ...