Show simple item record

dc.contributor.advisorDaniel D. Frey.en_US
dc.contributor.authorSung, Christinaen_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Mechanical Engineering.en_US
dc.coverage.spatiala-ii---en_US
dc.date.accessioned2018-02-08T16:26:35Z
dc.date.available2018-02-08T16:26:35Z
dc.date.copyright2017en_US
dc.date.issued2017en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/113499
dc.descriptionThesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.en_US
dc.descriptionCataloged from PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references (page 20).en_US
dc.description.abstractTwo small-scale well-irrigation systems in rural Uttar Pradesh which had previously operated via diesel pumps have been modified to operate via solar pumps. The regions where the irrigation systems are located are currently experiencing drought, and the well of one of the systems runs dry during irrigation. It is hypothesized that the 3HP solar pumps installed in the systems are larger than necessary, and are overdrawing from the water supply. A pump-sizing software tool was developed in Excel Spreadsheets to model and analyze the two specific systems, as well as to aid in future pump-sizing for long-term water sustainability for similar types of irrigation systems operating in water-scarce conditions. It was determined that the 3HP pumps installed in the irrigation systems are not unreasonably large for the crop water demands, and that under drought conditions, it was inevitable that continued irrigation at the two sites studied would eventually lead to well depletion and is thus unsustainable. Focusing on pump-sizing for these types of irrigation systems in water-scarce conditions may not be as effective for water sustainability as adjusting the irrigation systems and methods at the sites.en_US
dc.description.statementofresponsibilityby Christina Sung.en_US
dc.format.extent20 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsMIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectMechanical Engineering.en_US
dc.titlePump-sizing software tool for small-scale solar-powered irrigation systems in water-scarce conditions : a case study in Uttar Pradeshen_US
dc.typeThesisen_US
dc.description.degreeS.B.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc1020069026en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record